It is a hefty unit. The case is 316L stainless steel, as is the solid
link bracelet. The case measures 44mm wide, 52mm long, and 15mm thick.
It looks the part of a tool watch and feels like it too, there is
noticeable weight to the piece. The case is brushed, with vertical sides
and only a slight curve to the lugs in profile. It has a nice fat screw
down crown at 3 o'clock that is signed and knurled. The size makes it
easy to operate but I am grateful for the crown guards, not only for the
protection they afford, but also for their size. Those wedges on either
side of the crown help to integrate it into the case for a better
visual balance.
The case back is decorated with an image of a mermaid, and inside you
will find a Seiko NH35 (4R35). This movement seems to be finding its way
into many micros lately, and I rather like it. It is a hacking, hand
winding automatic with 24 jewels and a power reserve of over 40 hours.
You can think of it as occupying a position between the more common
Miyota 8215 and 9015. Like the 8215, it has an oscillation rate of 21.6k
bph so it is not as smooth as the 9015, but it has the hacking and hand
winding capabilities the 8215 lacks. It is also cheaper than the 9015
and I have noticed the rotor is quieter than either of them.
Up front, we find a flat sapphire crystal with an anti reflective
coating on the inside. Sapphire is always a nice feature at this price
point. The unidirectional timing bezel is tall with an aggressive gear
tooth cut that gives the watch a purposeful, industrial look and also
makes it very easy to operate. The 90 clicks around the dial are very
smooth with positive detents. There is a little play in the bezel, but
not so much that I would worry about slip. Unlike many watches in this
price range, the bezel insert is not printed. Instead, the index and
numerals are recessed and painted; they are not lume filled but there is
a T25 tritium tube at top center.
The dial is flat black with white sword hands, an orange second hand,
white printed numbers and index, and is surrounded by a plain brushed
rehaut. There is a black on white date at 4:30. You may notice the watch
looks a bit smaller than 44mm. There are a couple of reasons for this.
First, the bezel itself is slightly smaller than the case, about 43mm.
Second, the black insert is even smaller than that and the full index
fills the black space. As a result, your brain sees a narrower band of
black than is really there. It creates the illusion of a slightly
smaller face and makes the watch wear more like a 42 or 43mm, in spite
of its bulk.
Tritium is a key feature on this watch. In addition to the one on the
bezel, there are 12 tubes on the dial and one on each of the three
hands. Tritium is interesting stuff, because it does not require light
to charge, and it does not fade like conventional luminescent material.
Instead, the tubes are filled with tritium gas and painted with
fluorescent material. The tritium undergoes a low level radioactive
decay, and the electrons emitted make the paint fluoresce. Unlike
luminous paint, tritium tubes take decades to fade. Borealis took an
extra step on this dial and treated the Arabic numerals with
conventional lume so you get the initial bright burst from the lumed
numbers, as well as the steady glow from the tritium in the hands and
markers. It is a really cool effect, and highly legible at night.
The bracelet is 24mm wide, tapering to a 22mm locking divers clasp. The
clasp is tight and requires a firm hand before it pops, but I prefer
this to a clasp that opens too easily. The links are solid and have both
polished and brushed finishes, which dresses up the watch a bit. The
bracelet will fit a broad range of wrists. I removed four links to fit
my 6.5" wrist, and I still had room for adjustment in the clasp. It is a
solid, nicely machined bracelet and the fitted end links are good and
snug. There are no unpleasant gaps or rattles here. The Borealis web
site says it has screwed links, but this is incorrect. It actually uses
split pins. I have nothing against pins, but it is an error on the site.
I kept the watch on the bracelet for the review period and resisted my
usual urge to swap straps. It would be a bit top heavy on a NATO, but a
thick leather strap would look great. In fact, with a name like "Sniper"
you are almost obligated to try it on an ammo strap, but the spring
bars are very close to the case. The clearance is so tight, I could not
fit even a standard weight nylon NATO through, so you must choose your
straps wisely.
After wore it for a couple of days, and just
enjoyed the heck out of it. It was one of those watches that just felt
right at home on my wrist. I generally wear a different watch each day,
and often change watches in the evenings, but wore the Sniper for three
days straight. Three days! It was madness, yet I could not resist. I
found it easy to wear and with the slimming effect on the its face and
the bit of polish on the bracelet, I could even get away with it in the
office. It
is a handsome watch that looks like a serious machine, feels like a
bank vault, and functions beautifully day or night. If you like a big
case, and are shopping for a tough, affordable diver/field watch, the
Scout Sniper is definitely worth a look.
Pro: Top specs, wears well.
Con: Close spring bars. Bezel could be a tad tighter.
Sum: At $299, the Sniper is right on target.* The Time Bum approves.
* Oh come on! Like you weren't thinking of the same terrible pun? Please.
Richard Mille, ancora una volta sponsorizzato la Voiles di Saint Barth, una settimana di eventi Ocean Racing nei Caraibi, giunto alla sua quarta edizione. L'evento, che Richard Mille ha collaborato con sin dal suo inizio, ha riunito 60 navi a vela e 800 velisti provenienti da tutto il mondo.Di fronte a una costante di 20 nodi brezza e regolarmente in alto mare, in barca diverse classi hanno corso sul corso nei pressi dell'isola di Saint Barth.
vedere di piu 
vedere di piu 
vedere di piu 
